PFIB microscopy is an advanced technique for site-specific material removal, cross-section preparation, nanofabrication, and three-dimensional (3D) microstructural characterization. A focused beam of accelerated ions removes material through sputtering, exposing subsurface structures for subsequent imaging and analysis by SEM.
Unlike conventional gallium focused ion beam (Ga-FIB) systems, which use a liquid-metal ion source, PFIB employs a plasma ion source capable of generating substantially higher beam currents. This enables faster removal of large material volumes while maintaining the precision required for microscopic sample preparation and serial sectioning.
The Helios 5 Laser Hydra TriBeam supports 4 selectable ion species: xenon (Xe), argon (Ar), oxygen (O), and nitrogen (N). Each interacts differently with the specimen, providing flexibility in milling efficiency, surface chemistry, ion implantation, and the quality of the prepared surface.
Selecting the Appropriate Ion Species
The choice of ion species depends on the specimen composition, required removal volume, surface sensitivity, and subsequent analytical technique. Milling efficiency, surface damage, and chemical modification can vary significantly between materials and operating conditions.
The following comparison summarizes the principal advantages, limitations, and recommended applications of the five ion species available across the NIC-EM focused ion beam systems. The recommendations are based on published experimental studies and technical documentation; optimal conditions require validation for individual specimens and analytical objectives.
Science Education and Research Center (SERC)
Room 008
Publications using EM Lab data must acknowledge the facility.
See here.